Cordless Nail Guns

Paslode CF325 902200 Cordless Framing Nailer

admin — Mon, 14 Dec 2009 05:26:46 +0000

Ideal for framers, general contractors, custom homebuilders, and remodelers, the CF325 Fuel-Powered Cordless Framing Nailer (#902200) drives nails fast thanks to steel O-rings, an aggressive nose piece, and an innovative fuel-and-nail combo pack. And with no cords, hoses, or compressors to drag around, you'll save time and get powerful, precise performance everywhere you take this must-have tool.The CF325 Fuel-Powered Cordless Framing NailerAt a Glance:Cordless, lightweight portability; no hoses or compressorDrives 3-1/4" PowerBoost Black Tip Coated nails into LVLTool-free depth adjustmentIncludes carrying case, rafter/belt hook, quicklode fuel cell, rechargeable 6V battery, battery charger, and more1-year full warranty; 5-year extended warrantyCordless and lightweight at 7.5 lbs, the nailer is ideal for work in tight spaces. Nose acctuation increases speed and facilitates nailing in corners. Cordless Design for Flexibility on the JobWith the CF325 Fuel-Powered Cordless Framing Nailer, you'll never have to worry about dragging around annoying cords, dirty hoses, or bulky compressors. Instead, you'll get the portability and flexibility you need to move around the jobsite and finish hard-to-reach areas--without the mess and clutter of a pneumatic tool. And because you won't need to set up or break down, you'll save both time and labor costs.Drive Nails in the Toughest LumberIdeal for professionals and remodeling enthusiasts, the powerful CF325 Fuel-Powered Cordless Framing Nailer drives 3-1/4" PowerBoost Black Tip Coated nails (available only with Paslode Fuel + Nail Combo Packs) in the toughest lumber, so you can handle decking, sub-assembly blocking, sheathing, and trussing of all types. And when you're tackling a big job, you'll be grateful for the high-capacity magazine, which holds up to 48 nails (one strip).What's more, this nailer offers the convenience of a nail lockout feature that prevents blank fires and a tool-free depth-of-drive adjustment. And for durability and speed, the CF325 has an aggressive nosepiece and steel O-rings.Big Power in a Compact PackageThe CF325 Fuel-Powered Cordless Framing Nailer uses a patented fuel plus battery system to give you exceptional power and performance. The included rechargeable battery will drive 4,000 nails on one charge, while one Orange quicklode Fuel Cell (included) will drive up to 1,300 nails. The nailer itself can drive approximately 50,000 nails before it needs cleaning--up to 5x more nails than the previous model.Lightweight and compact, the 7.5-lb. CF325 is easy on the arms, and it fits easily between 16" on-center studs, joists, and roof trusses. And with a non-slip grip that reduces hand fatigue, it's comfortable to hold, even during all-day jobs.For easy mobility, the CF325 features a heavy-duty rafter hook that makes it easy to hang the CF325 on a tool belt, ladder, or rafter.The CF325 is backed by a one-year normal wear parts warranty and a five-year limited warranty.About Paslode: Providing Professionals with Innovative SolutionsWith more than 70 years of experience, Paslode provides the standard by which other pneumatic and cordless fastening systems are measured. With its goal to provide professional users with high-quality fasteners and fastening tools, Paslode has achieved many industry firsts and innovations, including powerful tools that drive through the toughest woods--even LVL--and fuel-cell batteries that save time and energy.What's in the BoxNailer; one Orange quicklode Fuel Cell; rechargeable 6.0-volt oval battery; two-hour AC battery charger; rugged carrying case; owner's manual; safety glasses; and 5/32" hex wrench.

PASLODE CORDLESS FRAMING NAILER CF325 NEW NO RESERVE!!
US $255.00

Paslode cf325 framing nailer brand new as shown 902200
US $330.00

Paslode CF325 902200 Framing Nailer 900420 Upgrade
US $290.00

NIB Paslode cordless CF325 Framing Nailer 902200
US $163.26

PASLODE 902200 CF325 CORDLESS FRAMING NAILER NEW
US $290.00

Paslode 902200 Cordless Framing Nailer CF325
US $373.99

Hitachi NR90GR Round Head 2-inch to 3-1/2-inch Cordless Gas Framing Nailer

admin — Wed, 09 Dec 2009 04:39:11 +0000

Combining utility with traditional nailing power, the Hitachi NR90GR 3-1/2-Inch Gas-Powered Round-Head Framing Nailer eliminates the need for an air compressor by utilizing fuel rods and a rechargeable battery to drive standard round-head nails with precision. Ideal for general contractors, remodelers, construction workers, and service workers, the NR90GR will make short work of framing, sub flooring, fencing, sheathing, punch-out work, and more.Features of this nailer include an E-Z view magazine and the capacity for large-dimension round-head nails. (Click squares to zoom in on components.)NR90GR 3-1/2-Inch Gas-Powered Round-Head Framing NailerTool SpecificationsNail TypeFull Round HeadNail Diameter Range.113 - .131 mmNail Length Range2"-3-1/2"Magazine Angle20Â°Magazine Capacity1 Nail StripBattery Life4,000 NailsBattery7.2 VoltCharger1 hrFuel Rod Life1,200 NailsHookRetractable RafterFeeder2-StepOverall Height13-29/32"Overall Length14-1/4"Overall Width4-1/4"Weight7.9 lbs.Depth AdjustAllen WrenchSpeedy and Powerful Nail Delivery SystemThe NR90GR gas-powered nail delivery system is a powerful alternative to traditional pneumatic nailers. With no annoying hoses to wind, this nailer is capable of driving up to two nails per second and 1,000 nails per hour. A single battery charge will fire about 4,000 nails and a fuel rod will fire about 1,200 nails, which means you'll get the job done quicker.The NR90GR fires up to 3.5 x 0.131-inch round-head nails, whereas most of the competition falls off at 3-1/4 inches. This allows for maximum flexibility when working on various materials and applications. The adjustable depth-of-drive nose piece ensures each nail gets seated properly to suit the workpiece.User-Friendly Design Reduces DowntimeWith an easy two-step nail-loading procedure, the NR90GR will help you reduce downtime and improve efficiency. Simply slide the attached strip of nails into the magazine and release the feeder to lock the nails in place--you'll be ready to go within seconds. An E-Z view feature on the magazine prevents untimely reloads and keeps you on task.For further ease of use, the NR90GR utilizes a six-nail lockout feature for preventing accidental dry firing of the nailer and ensuring proper loading and firing at all times. Additionally, the fuel rod door is double locked to eliminate accidental opening of the fuel-latch door during operation. A low-battery indicator gives you plenty of warning for your next recharge.Designed for Comfort, Control, and PortabilityLike all Hitachi tools, the NR90GR is ergonomically designed to enhance comfort and control on the job. To start, the nailer weighs just 7.9 pounds and features a well-balanced design that minimizes user fatigue and allows for easy one-handed operation. Additionally, the handle is wrapped in Elastomer compound to reduce vibration and prevent slippage for ultimate control. A collapsible rafter hook provides additional convenience by allowing you to hang the nailer from a rafter when both of your hands are needed.The NR90GR doesn't require air hoses or a compressor, making it much more portable than a pneumatic nailer. Measuring just 14-1/4 x 4-1/4 x 13-29/35 inches (LxWxH), it will fit into tight spaces with ease.The NR90GR Gas Powered Framing Nailer is backed by Hitachi's one-year warranty.About Hitachi: A Tradition of InnovationHitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.What's in the BoxNR90GR Gas Framing Nailer, 7.2-volt 1.4-Ah battery, charger, carrying case, and safety glasses.The nailer's balanced, lightweight design and Elastomer grip make one-handed operation easy. View larger.

HITACHI 3-1/2" GAS POWERED ROUND HEAD NAILER NR90GR
US $339.95

HITACHI NR90GC,NR90GR NAILER PART#885283,885316 O`RINGS
US $16.00

Hitachi NR90GR 3-1/2" Gas Powered Framing Nailer w/WNTY
US $309.00

hitachi 7.2v nr90gc nr90gr cordless tool battery
US $32.99

NEW HITACHI GAS POWERED ROUNDHEAD FRAMING NAILER NR90GR
US $455.00

HITACHI GAS POWERED ROUND HEAD FRAMING NAILER NR90GR
US $274.95

Paslode 900420 Cordless IMCT Framing Nailer

admin — Thu, 03 Dec 2009 16:43:15 +0000

Ideal for light framing and remodeling projects and high-volume commercial use, the Paslode Cordless IMCT Framing Nailer is compatible with 2.0-inch to 3.25-inch full- and clipped-head nails. This handy, high-performance tool lets you avoid the hassle of compressor noise and hoses. Also, itâ��s easy to handle and hold, offers consistent performance, and supplies the right amount of power for a range of uses..caption {font-family: Verdana, Helvetica neue, Arial, serif;font-size: 10px;font-weight: bold;font-style: italic;}ul.indent {list-style: inside disc;text-indent: 20px;}img.withlink {border:1px black solid;}a.nodecoration {text-decoration: none}The highly visible, easy-to-access load magazine makes reloading quick and simple. View larger.Batteries charge in under two hours for convenient, cord-free power. View larger.Each red fuel cartridge drives up to 1200 nails (fuel cell not included). View larger.Lightweight, Hose-Free Operation Minimizes Arm FatigueMeasuring 12.0 inches long and weighing just 7.3 pounds, the IMCT Framing Nailer is comfortable to handle and hold. Its 'sure grip' and well-balanced design combine with a soft trigger to reduce arm fatigue. And because you wonâ��t have to drag a hose with you as you work, youâ��ll be able to drive nails better and longer, without undue stress on your arms, hands, and wrists.Compact, Heavy-Duty Design Works Anywhere and EverywhereCompact enough to work in tight, hard-to-reach areas, the IMCT Framing Nailer packs a powerful punch with heavy-duty construction that can handle tough job conditions. It shoots up to 1,200 nails on a single fuel cell and up to 4,000 nails on a full battery charge, providing a cycle rate of two to three nails per second. And because it offers tool-free depth-of-drive adjustment--no wrenches required!--you can get more done in less time.Internal Combustion Linear Motor for Robust PerformanceUnlike other power fastening tools, the IMCT Framing Nailer is powered by an internal combustion linear motor. In simpler terms, the nailer owes its robust performance to its motor, which is similar to an automobile's motor. Additionally, the tool ignites a fuel and air mixture to produce the energy needed to drive the motor, and ultimately, the fastener.Patented Battery System for Consistency and ReliabilityAnother unique feature of this nailer is that it uses a patented system that requires both a fuel cell and a rechargeable battery (the fuel cell is not included). This translates to optimum consistency and reliability, whether youâ��re building a deck, working with wall sheathing, or repairing a roof. It also means the IMCT Framing Nailer is entirely self-contained. The tool carries its own fuel supply and battery--along with a supply of fasteners--making it easy to bring with you from site to site.Lockout Feature to Prevent Blank Firing and Wood DamageThe IMCT Framing Nailer boasts a lockout feature to prevent needless blank cycling, which can waste fuel and damage both the wood youâ��re working with and the nailer's components. This feature works by ensuring that five nails will be left in the magazine when the follower reaches the lockout area. Additionally, the tool will not operate when its nail supply has less than six nails.High-Visibility Magazine and Belt Hanger for ConvenienceThe IMCT Framing Nailer is designed to be exceptionally user friendly, with features that help keep your job running smoothly. First, the load magazine is highly visible, so it helps prevent you from running out of nails in the middle of a project. Thereâ��s also a convenient dual-position belt hanger, so you don't have to lay the nailer on the ground or on top of a ladder, nor do you have to wedge it among rafters. And if you can't remember where you last placed your nailer, its bright orange color makes it easy to spot.About the Battery Charging SystemThe IMCT Framing Nailer comes with a rechargeable battery and its own charging system. This charging system is the only one that will work with Paslode batteries (both round and oval). When your tool arrives, youâ��ll first need to charge the battery. Batteries will generally take five minutes to two hours to recharge, depending on the amount of discharge within the battery.Dimensions and Warranty InformationThe IMCT Framing Nailer has a height of 14.5 inches and weighs 7.3 pounds. It comes with a one-year limited warranty on all parts, a five-year warranty on all molded nylon parts, and a 90-day limited warranty on the bumper, driver blades, O-rings, and seal rings.What's in the BoxNailer, 6.0-volt battery, charger, belt hanger, rugged plastic carrying case, safety goggles, manual, and 5/32-inch hex wrench.The IMCT Framing Nailer is designed to for easy handling and reliable, professional performance.

Paslode Framing Nailer 900420 30 Degree Used
US $169.00

Paslode 900420 30 Degree Cordless Framing Nailer gas
US $96.00

Paslode 900420 IMCT Cordless Framing Nail Gun FOR PARTS
US $21.50

Paslode Cordless Framing Nailer 900420 O-Ring Kits X3
US $13.00

Paslode 30 Degree Cordless Framing Nailer 900420
US $102.50

Paslode CF325 902200 Framing Nailer 900420 Upgrade
US $290.00

Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer

admin — Wed, 02 Dec 2009 04:55:05 +0000

Long nails into hardwood? No problem. Working overhead? It's only 4.2 pounds. Hate having the exhaust in your face? Tool-free, 360-degree adjustment takes care of that. No time for jams? Clearing takes no more than a couple of seconds because of the quick-release nose. The magazine is made of nylon, but it seems as rugged to us as any metal magazine out there. That's also why this nailer is so easy on the hands. Add to that a nicely padded grip and a selective trigger and you'd think you have the perfect nailer. But get thisâ��there's a built-in dust blower that clears light debris and dust from your workpiece. Hitachi quality leaves nothing to want.--Kris Jensen-Van Heste

DEWALT DC612KA 1-1/4-Inch to 2-1/2-Inch 12-Volt / 14.4-Volt Ni-Cad Cordless 16-Gauge Straight Finish Nailer

admin — Mon, 30 Nov 2009 04:43:40 +0000

No compressor. No hoses. No kidding. And no sacrifices in speed or power, either. There's absolutely no comparison between this performer and the fuel-cell powered competition, which we thought was a great innovation. But there's no costly fuel cell to replace on this toolâ��-just pop on a recharged XRP battery and get back on the job. The only difference you'll feel between this and a traditional pneumatic is that you're not tethered to an air hose. It's just as fast and fires just as powerfully into both soft and hard joints. We love that you can choose bump or sequential mode for precision or speed, something most nailers don't offer, and the integrated headlight is another impressive addition, really lighting up your workpiece even in the worst conditions. There's a fantastic six-position numbered dial to reference your depths, so you can move easily between, for example, baseboard and crown molding without struggling to reset the depth. DeWalt's covered what would have been our main safety concern: An air tool can't fire without a hose, but what's to keep this one from being accidentally fired? They've built in a contact trip lock-off. We were pleased with the troubleshooting process, tooâ��the nosepiece is clear and very accessible, letting you clear a jammed fastener without screwdrivers or wrenches, though we couldn't get it to jam for us. Rear loading is simple and fast, and it accepts most brands of 16-gauge nails. It's built tough for the job site, but the home hobbyist would love this tool. Just hook it on your tool belt and go; it's one of the coolest tools we've seen, and the kit has everything you need: a one-hour charger, two 14.4V XRP batteries, reversible belt hook, no-mar tip, safety glasses and the heavy-duty kit box.--Kris Jensen-Van Heste

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer

admin — Sun, 29 Nov 2009 01:42:39 +0000

The Hitachi NR83A2 3-1/4-Inch Round-Head Framing Nailer offers great performance in a compact, lightweight package. The NR83A2 is best used for floor and wall framing, truss buildup, window buildup, construction of subflooring and roof decking, wall sheathing, and mobile home and modular home construction. With tool-less depth-of-drive adjustment and durable construction, the NR83A2 is built for accurate results and heavy-duty use, making it an ideal tool for construction workers, contractors and carpenters.This framing nailer offers dual firing options and depth-of-drive adjustment for efficiency. View larger.NR83A2 3-1/4-Inch Round-Head Framing NailerTool SpecificationsNail Capacity64-70Magazine Angle21Â°Air Inlet3/8"Operating Pressure70-120 psiWeight7.9 lbs.Accessories Included1 Pair Safety GlassesAdjustable Depth of Drive for PrecisionThe NR83A2 features a convenient depth-of-drive adjustment knob located near the nose. Simply turn the dial half way to make quick, accurate modifications to the driving depth with no tools required.Quick-Load Magazine for Reduced DowntimeFor further convenience, the NR83A2 features a two-piece steel magazine that's designed for quick and easy loading of round-head plastic strip nails from two to 3-1/4 inches in length. The magazine has a nail capacity of 64-70 nails, which is equivalent to two nail strips. To replenish the magazine, simply pull back the nail feeder--the feeder will lock the nails in place.Dual Firing Options for Precise or Continuous DrivingFeaturing ANSI-compliant select actuation for making tool-less firing transitions, the NR83A2 Framing Nailer can be used for a variety of different applications. By simply sliding the selection control up or down with your hand, you can choose between intermittent and continuous firing. Intermittent firing is ideal for jobs that require precise driving, while the continuous setting can be used to fire nails at a rapid pace by using a bumping motion along the workpiece.Designed for Comfort and EfficiencyWell balanced at just 7.9 pounds and measuring 21-13/16 x 4-1/4 x 13-3/8 inches (LxWxH), the NR83A2 is easy to maneuver. Its soft rubber grip provides optimum control and extended comfort for all-day jobs.For further ease of use, a hardened toenail push lever will help the nailer stand up to wear and tear. And in case you get a jammed nail, the open nose design will make extraction a cinch.Designed with a 3/8-inch NPT thread air inlet, the NR83A2 requires 70-120 psi operating pressure to function properly. It takes in air at a rate of 0.064 cubic feet per cycle at 100 psi.The Hitachi NR83A2 Framing Nailer is backed by a five-year limited warranty.About Hitachi: A Tradition of InnovationHitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.What's in the BoxNR83A2 Framing Nailer and safety glasses.Lightweight with a soft rubber grip, the nailer is comfortable and easy to maneuver. View larger.

Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing

admin — Wed, 06 May 2009 08:00:33 +0000


Bostitch, Round Head Framing Nailer, Doubles As A Metal Connector Nailer, Drives Most 21-23 Degree Plastic Collated Round Head Nails From 1-1/2" To 3-1/2". Comes With Bostitch Smart Trigger, Delivers 1050 IN LBS Of Power.

*NEW* Bostitch BT200K-2 BT200 Brad Nailer Air Nail Gun
US $48.00

3" 10D 28 Deg.Wire Framing Nailer Nails Fits Bostitch
US $12.99

BOSTITCH roofing/framing/BRAD NAILER NAIL GUN BAG NEW
US $34.99

BOSTITCH TOOLS RN46 AIR COIL ROOFING NAIL GUN RN-46
US $48.99

Bostitch 2 ' 18 ga Brad Nails
US $6.75

Bostitch 15Ga Oil-Free Angled Finish Nail Kit N62FNK-2
US $135.00

Hitachi NR90AE Round Head 2-Inch to 3-1/2-Inch Framing Nailer

admin — Mon, 04 May 2009 05:21:07 +0000

Hitachi's superior design and engineering make this a top-of-the-list choice for a framing nailer, just as hardworking as the NR83 model that preceded it, but with a few major improvements. We like the way Hitachi's integrated both types of trigger, so there's no need to replace anything â�� just flip the lever on the tool down for bump or up for sequential firing. Also tool-free is the depth-of-fire adjustment: Just turn a small knob to set your depth. It's even easier than adjusting the air pressure. This nailer has a 21-degree angled magazine and fires nails from 2 inches to 3-1/2 inches, a wider range than the old NR83 handled. Loading is much faster and easier on this gun, too, because Hitachi's redesign repositioned the loading mechanism at the rear of the magazine. A maximum of 64 plastic-strip collated full round head nails will fit in the magazine, but reloading takes a few seconds, so there's no downside to that. This is one of the most jam-free guns we've used; it just fires and fires. Should you find a way to jam it, the procedure to clear the jam is super fast and couldn't be easier. The balance of this tool is incredible; at a relatively light 7-1/2 pounds, you'd expect to feel a little strain after using this gun for a few hours, but the ergonomics are fantastic. Hats off to Hitachi on this redesign. And of course, you'll notice immediately the difference in appearance between this gun and its predecessor. It's sporting Hitachi's hot new look, with brighter colors and a flame-like graphic, better suited, we think, to the new personality of this fantastic nailer.--Kris Jensen-Van Heste

Paslode 501000 F-350S PowerMaster Plus Pneumatic Framing Nailer

admin — Fri, 01 May 2009 18:54:19 +0000

Find the very best deals online on Paslode cordless nail guns ... our inventory changes daily so be sure and check back often.

This framing nailer is a remodelerâ��s dream. The width of the nailer, from tip to exhaust port, is less than 14". This means it can fit between joists, rafters, and studs 16" on center. This is an invaluable feature when blocking, sistering joists and the like. This framing gun is one of the lightest on the market today, is well balanced, and has minimal recoil, which reduces arm fatigue when using the tool all day. It has tool-less adjustable exhaust port and was one of the first nailers to have an adjustable nail depth-of-drive option on the tool. It requires a hex wrench, which is located on the tool. This feature allows you to set the proper depth of the nail you are driving on the nailer, instead of turning down the pressure on the compressor, or yelling down from the roof for someone else to do it and trying to coordinate the right amount. This is particularly important when switching from 16d nails, used for framing studs, joists, etc, to 8d nails, used for sheathing. The pressure required to drive a 16d is much greater then that required to drive an 8d, and will overdrive the 8d nail, sometimes to the point where it goes entirely through the sheathing, not holding it all to the stud, rafter or joist. The inspector wonâ��t like that. This tool has never jammed on me, but if it does, the nose piece is easily removed with the on-board hex wrench to clear the jam. This framer has a rafter hook so you can hang it from a rafter, joist or ladder, when you need both hands to pull up the next rafter, for example; a very handy feature. This tool has remained virtually unchanged for almost 7 years now. Every other company has copied this tool in recent years and has added fancy features. This Paslode framer is still a great competitor to every other gun out there. Itâ��s quite durable too. Mine has been dropped quite a few times on slabs, off ladders and even off the roof a few times and it is still functioning normally. The most abuse my gun has ever received is over oiling by apprentices. 3-5 drops per day is enough, not 20. This framing nailer has a safety feature that prevents the last 3 nails from firing. This prevents accidental firing of those last nails which has been a problem in the past. Iâ��m surprised that not every new tool made since has this feature. The nailing tip is sharp enough to grab studs when toe-nailing, but could be a little sharper. The magazine holds 2 clips of clipped head nails, up to 3 Â½". The magazine has inch markings to help with nailing schedules, when nailing off sheathing. Regular and sequential triggers are available; mine came with both. This is a great tool to use for framing and a must for remodeling, from the company that created the first framing nailer. -- Gabriel Shantara Ford

If you didn't see the cordless nail gun you were looking for you can try the "Search" box in the upper right hand column on our site. Thanks for shopping Cordless Nail Guns.

Best Cordless Nail Gun for Finishing Work?

admin — Sun, 21 Sep 2008 17:36:46 +0000

Best Cordless Nail Gun for Finishing Work?

What is the best cordless nail gun for finishing work?

Of course this is a matter of opinion but the two that I see touted to be the best for finishing work are the 18v Dewalt trim nailer 16 gauge and the Pasolde.

If you go with the Dewalt the battery will be usable in any other Dewalt 18v tools too. It can shoot 500-600 nails on a fresh battery.

As for the Paslode they make both a straight and an angled version and it's suggested to buy extra co2 cartridges while you're at it.

Good luck and be sure to leave your comments on what you think is the very best nail gun for finishing work!